Drip irrigation is the process of applying small amounts of water slowly and directly to the base root of the plant or shrub, exactly where you need it. A drop is most suitable for flower beds or shrub and will not work on a lawn of water. A professionally designed irrigation system consists of a combination of rotors, sprays and drops. The rotors are ideal for large lawns, sprays are used for small lawns and shrub beds, drip and can be used in shrub beds and delicateFlowers.
There are several great things about drip irrigation. First of all, you are only applying water directly where it needs the plant or flower, at the very root of the plant, which cuts a lot of waste. Secondly, because it reduces the water exactly where to apply will be used to eliminate, since irrigated areas will not be useless. If the source water is measured as the city's water, drip irrigation can save you hundreds of dollars a year. Drip Irrigationconsumes up to 300X less than conventional spray water when casting the same area.
If you have an existing irrigation system, you can actually easy enough to convert irrigation easy. For example, if you can make a bed shrub spray heads that are currently used, the spray cap and hose to run off and drop his "place. Rain Bird makes a product called" Upgrade Kit "directed in 1800 in the case of a Spray existing series (which are more commonly installedused in residential irrigation spray heads.) Even if you have a different make or model of spray heads, you can simply remove spray near the center or the center of the area and install Rain Bird's 1800 retro-fit.
The drop is retrofitted with a pressure regulator to reduce the pressure to be suitable for drip and also has a screen to filter the waste would clog the emitters. Then you can exit the race with retrofit and pre-installed along the dripBed and in the immediate vicinity of plant roots. Rain Bird is a drip, drip that the 600-series is called, and is pre-installed transmitters distributed to each foot 1. You also can install drip with all 18 "if you want.
If you do not want to drop channels with pre-installed when you choose the "naked" only to drop the pipe itself. You can then manually install spotlights in the size and location where you want. Drip is measured in liters per hour (GPH)instead of gallons per minute (gpm) as conventional sprinklers. The 600-series with pre-installed hose drop stations, of which I spoke earlier of 0.9 gph allows any transmitter. This may not seem like much, but it is almost a liter of water per hour are from each emitter. Imagine filling the tank of a gallon of milk to 90% and that is the amount of water that is released.
There are many areas that are suitable for drip irrigation, is up to you to use if you wantit. I will say a bad thing fall that even with the filters and screens, the heater will tend to small systems that shallow wells for their water source is blocked. This is because of dirt and minerals like iron, that tend in this well. Most of the deeper wells are not drop more of a problem and works best with a clean source such as city water. I tend to use drop linked to municipal water systems primarily for clean water and cost savings. SpraySystems not related to shallow wells cost of housing an arm and a leg in the water does, so I tend to keep pace with these spray systems.
0 comments:
Post a Comment