Tuesday, August 23, 2011

Installing drip irrigation

!±8± Installing drip irrigation

Drip irrigation is the process of applying small amounts of water slowly and directly to the base root of the plant or shrub, exactly where you need it. A drop is most suitable for flower beds or shrub and will not work on a lawn of water. A professionally designed irrigation system consists of a combination of rotors, sprays and drops. The rotors are ideal for large lawns, sprays are used for small lawns and shrub beds, drip and can be used in shrub beds and delicateFlowers.

There are several great things about drip irrigation. First of all, you are only applying water directly where it needs the plant or flower, at the very root of the plant, which cuts a lot of waste. Secondly, because it reduces the water exactly where to apply will be used to eliminate, since irrigated areas will not be useless. If the source water is measured as the city's water, drip irrigation can save you hundreds of dollars a year. Drip Irrigationconsumes up to 300X less than conventional spray water when casting the same area.

If you have an existing irrigation system, you can actually easy enough to convert irrigation easy. For example, if you can make a bed shrub spray heads that are currently used, the spray cap and hose to run off and drop his "place. Rain Bird makes a product called" Upgrade Kit "directed in 1800 in the case of a Spray existing series (which are more commonly installedused in residential irrigation spray heads.) Even if you have a different make or model of spray heads, you can simply remove spray near the center or the center of the area and install Rain Bird's 1800 retro-fit.

The drop is retrofitted with a pressure regulator to reduce the pressure to be suitable for drip and also has a screen to filter the waste would clog the emitters. Then you can exit the race with retrofit and pre-installed along the dripBed and in the immediate vicinity of plant roots. Rain Bird is a drip, drip that the 600-series is called, and is pre-installed transmitters distributed to each foot 1. You also can install drip with all 18 "if you want.

If you do not want to drop channels with pre-installed when you choose the "naked" only to drop the pipe itself. You can then manually install spotlights in the size and location where you want. Drip is measured in liters per hour (GPH)instead of gallons per minute (gpm) as conventional sprinklers. The 600-series with pre-installed hose drop stations, of which I spoke earlier of 0.9 gph allows any transmitter. This may not seem like much, but it is almost a liter of water per hour are from each emitter. Imagine filling the tank of a gallon of milk to 90% and that is the amount of water that is released.

There are many areas that are suitable for drip irrigation, is up to you to use if you wantit. I will say a bad thing fall that even with the filters and screens, the heater will tend to small systems that shallow wells for their water source is blocked. This is because of dirt and minerals like iron, that tend in this well. Most of the deeper wells are not drop more of a problem and works best with a clean source such as city water. I tend to use drop linked to municipal water systems primarily for clean water and cost savings. SpraySystems not related to shallow wells cost of housing an arm and a leg in the water does, so I tend to keep pace with these spray systems.


Installing drip irrigation

Replacement Gas Can Spouts Buy Online Great Deals Schwinn 113 Exercise Bike

Wednesday, August 10, 2011

Green Living - Being Waterwise in the Garden

!±8± Green Living - Being Waterwise in the Garden

Design your home is the Waterwise irrigation system would not only save water but also save on water bills next year. About 100 kilo liters a year can occur through the exchange of 100 m2 of manicured lawn, artificial grass or sidewalks, or 50 kilo liters saved one year through the exchange of this region with a Waterwise Garden.

If you want to install an automatic irrigation, installing a rain sensor with a. These devices monitor or respond to soil moisture and preventHolder of power for irrigation. Rain sensors range in price, but a good one is less than $ 100.

Add lots of organic matter such as compost to improve the health and manure water retention of topsoil and soil structure. This is one of the most important steps to make your garden drought tolerant. Remember, the more your plants are healthier, more likely to withstand drought.

Watering the plants early in the evening or at night, the decline ofEvaporation. About 60% of the water is lost when using sprays well during the hot hours of the day - the water ever touches the ground or evaporate quickly, how it works. Watering by hand will be relaxing and effective, especially if you have a trigger nozzle, allowing only the water left on the tube when it is pressed.

Perform regular maintenance. While automatic sprinkler systems to devote time and energy elsewhere, if you do not have time to monitor the system, you can payMoney down the drain. Margins of breaks, leaks, faulty valves and pipes are often divided and plenty of water can be wasted, especially if irrigation is under pressure.

As the seasons change, the need for watering plants. You may find that the only watering day per week is all you need in the fall and spring, and then maybe twice a week allowed during the summer, as the Water Corporation, for most garden plants.

We can still enjoy the lush gardens, is all too commonMeaning, one of the appropriate soil conditions and equipment appropriate network. We stock and sell a range of products for Waterwise irrigation, rainwater tanks and greywater systems.

Waterwise crosslinking

The use of water in gardens, around 35% of water consumption for domestic use. Since the effects of climate change begin to impact, it makes sense to rethink our consumption of water in the garden. Standard network is far from efficient. Evaporation loss from wind and sun can be as much as60%. Water restrictions means that you can only water 2 days a week from the water system.

We can still enjoy the lush gardens, just common sense, soil conditions and adequate network equipment properly. The new networking technology involves the ability to direct the water into the root zone of plants directly, reducing waste in areas that do not have water. Drippers can be placed along a pipeline at the required distance for existing plants. Drippers can be used in aRange of courses, allowing mixed systems can be adapted to their needs for water.

Drip irrigation in a veggie garden

Inline drip tube can also be used to irrigate a garden or lawn. The pipe is laid in a grid over the garden, or it can be woven around the house, but only the main root zone of plants.

Mulch is spread over the garden to a depth of 100 mm, allowing the water loss through evaporation by wind and sun almostnothing. This also reduces competition from weeds and rubbish, and garden maintenance that requires much less time.

Lawn

Through the use of a chemical sprinkler systems in preventing root, and the drop tube is wrapped in geotextile fabric, underground lawn irrigation pipes can be set as well with drippers. These two methods indicates that the drop from emitter to grow roots into the pipe to be protected, thereby blocking the outlet.

Drip tubing is available in a wide range of formats.5 mm tube may be used in small areas and raised flower beds. 13 mm and 17 mm tube is used on larger areas and meadows, as it allows greater water connections. Droplet sizes were designed to 1.9 l / h and 3 L / h of clean water sources.

Showcase performances under the lawn drip irrigation

For water bore and recycling of gray water, branches to 8 l / h were designed. Particles larger drain dirty water can pass.

In all cases the filters are recommended.Also recommended are flush line valve and vacuum release valves. The vacuum release valves allow air drawn into the system and prevents sand or organic material in the nasal drip when water is turned off.

The valves allow the flow of washing line to a certain amount of water from the end of the pipe when the water is turned on for the first time, so that any accumulation of debris from the tube to be removed.

Soil type affects the way in which the pipe is fixed. In clay soils, it is possiblehave a greater distance between the lines to drop because the water tends through the upper soil layers more than distribute it sucks down. In sandy soils, absorb the water faster than it has spread so dropper must be approached.

The drop tube is in line with a series of different distances. 30 cm is the most common. 5 mm drip tubes can be 15 cm, 30 cm and 50 cm. The larger sizes up to 1 m are

The installation of water Pty Ltd, we haveprovide a range of options for networking Waterwise. We also have water as the accredited installers.

Other options include Waterwise linking the return of gray water from laundry, shower and bathtub.

Water systems can also show a number of systems that have the approval of Ministry of Health for the use of greywater in Western Australia.


Green Living - Being Waterwise in the Garden

Worx Wg151 Buy Online

Monday, August 8, 2011

Shrub and Rose Drip Irrigation Kit Model K001

!±8± Shrub and Rose Drip Irrigation Kit Model K001


Rate : | Price : | Post Date : Aug 08, 2011 07:29:27
Usually ships in 1-2 business days

###############################################################################################################################################################################################################################################################

Golf Rangefinders Comparison Purchase !8!# Order Remote Dog Collar Training

Thursday, August 4, 2011

Landscaping Weed Barrier Fabric - How to Install Landscape Fabric

!±8± Landscaping Weed Barrier Fabric - How to Install Landscape Fabric

When using landscaping fabric, preparing the ground for the project is as important as the quality of materials used. While many people have been weed barrier directly over existing or newly prepared area, the best performance and long-term results are quite good with the preparation.

Getting Started

Measure and mark the territory. Most professionals use inverted marking paint, but you can also use string, sticks, stones, pipes, or whatever you have available. Purchase order orHis landscape fabric to ensure that it is obvious when you start the project.

Remove all plants

Once the project areas is measured and marked, remove all vegetation. Depending on the area you work, there are several ways to remove trees and vegetation.

In the meadows that are covered and / or regions, we almost always around a double application of a non-selective herbicide such as. Make sure the area is actively growing, sprayHerbicide according to instructions, and then let it do its job. Within 5-7 days after application, irrigation of the area to start the growth of what has survived and all the seeds, which can boost vital. Repeat the application of herbicides. You may also want to repeat again if necessary.

In some cases we use a sod cutter to remove the top few inches of turf. In general, this is, after killing all the weeds, and is usually done to explore the region and make room for mulch, stones or otherOverburden.

I have seen other professionals to install landscape fabric over areas that are only cut turf, but were not killed with a herbicide. I can not recommend. Sod cutters only cut off the top of the lawn and really nothing to kill the roots. This could be a future problem, if you have deep roots aggressive weeds or grasses such as Bermuda.

For non-turf areas and old bed, you can talk to the method herbicide. And for all areas, including lawnAreas, you can use the method of herbicides or solorization.

Sunburn is basically baking the soil and expose it to extremely high temperatures that kill weed seeds and vegetation. This process is very simple and it works very well, but takes the longest to do.

Paving the way

If you plant to plant in areas where you plan to install the fabric, it is necessary to work in soil amendments and nutrients before installation. If possible, I recommend using slow-release organic fertilizerNutrients and compost. Try also the pH of the soil and add lime or sulfur in the right quantity, if necessary.

Once the weed barrier exists, is only able to add chemical fertilizers surface applied and will not be able to work the land. Of course you can add the changes to each hole as you plant the plant. However, it is time consuming, messy, and not through the root zone of the system to be extended.

Use a bar or spade, and amendmentsNutrients from 4 to 6 inches in the soil surface. Remove stones, sticks, debris and clods break. Rake the surface smooth.

Install irrigation systems

If you have an idea of ​​where you and your plants are expected to have an automatic drip irrigation, now is the time to put it. Place the main tube and power to run and drip emitters, in which your plants are. If you are planning a bubbler system, should be installed before the area wasmaintained.

Installing the Fabric

The easiest way to do this is to put the first barrier, before planting your plants. Some people recommend safety pins to hold the material in its place. There is an option. However, if you prefer to save money, you can hold down the edges with the floor covering you want to use. We normally only place or a stack bags of mulch, stone, or other ground cover along the edges and spreads from there, if we are ready plants.

I also saw aSome people plant the crop and then inserting the tops of the plants. This is usually tough on vegetation, breaking branches, and time-consuming.

It can be cut with a sharp knife or razor blade, useful stuff, but the best and easiest way we found that runs along the cut is to use a pair of sharp scissors. And instead of working the scissors, hold them ajar, where the leaves form a "V". Store the material in which both blades come together in "V" and push it through theCloth.

Plant

Mark your site or where the plants, have a vision. Use a sharp knife, razor blade or scissors and cut an "x" in the fabric of the size of the pot or root ball. Do not cut the size of the pot outside. Cut the "x" and bend the fins. Make the hole. Location and work the system properly. Gently place the plant near the edges.

Now place 2 to 4 inches of your chosen ground cover over the area and make sure to keep the flap cut and hold it in place.

AverageLandscaping to ensure the excess material along the edges, remains close to the edges.


Landscaping Weed Barrier Fabric - How to Install Landscape Fabric

!8!# Catalog Stihl Blowers Prices !8!# Slide In Gas Stoves Purchase !8!# Purchasing Seat Car Graco

Tuesday, August 2, 2011

Conserve water in your garden this summer

!±8± Conserve water in your garden this summer

Many water districts has been estimated that homeowners over 50% of its water for irrigation in the summer landscape. In a context of global warming and drought do not you feel a little 'guilty? It's time to end our long love affair with the needy lush, thirsty plants. We all had a good time and have fond memories of those days spent in the hot August sun to go around with the tube, all dependent on each other! Shipyards, saving the water with native or drought resistant plants are now allAnger.

My Life Coach to CoachBetty.com friend always says. "It 'time to change perspective, we think of the BOX!" It is time for our turn "backyard" mindset and "think outside of the lawn." Planting huge lawns and thirsty ornamental plants is like driving a gas guzzler, and wearing a pink top. And 'so 80s! Natives growing and drought-tolerant ground cover is like driving a hybrid phone and SMS on your chocolate covered strawberries.
OMG! DYGI? (Oh my God! Do you understand?)

GrowthThe locals will give you a beautiful landscape maintenance, reducing the water bill. It is probably too hot to effectively ensure the transformation in the garden this month, but start planning a plan to rip and cliffs in autumn. In the fall you want to be high maintenance plants that are not easily cut to remove them.

Questions to ask:

There is a lot of demand in the water?

And 'needy and cranky in the heat of summer?

(If yes, ask yourself why you moveda whiner.)

Has grown lush and make you look like a horticultural magician?

Otherwise, it's time to throw in just a few plants to the compost pile.

Before digging in new plants, work a good amount of organic matter (compost) in soil and plant cover on the soil with mulch. Amended soil retain more water than land devoid of organic matter. Land is changed by means of micro-and macro-organisms that secrete nutrients and aerate your soil settled, so thatThe water to the roots.

Last month I attended an informational class Suburban Habitat in Novato, California. led by Ryan Griss, our Coordinator of water conservation and landscape architect Matt Buchholz. I asked: "How can a star making his spectacular appearance in the dirt courtyard hot summer sun with the least amount of mental and physical labor?" The answer is twofold: a diverse selection of native plants and a reliable, efficient control of the system timer to drop.

Buchholz recommendsCeanothus (California lilac) and Archtostaphylos (Manzanita), two simple native shrubs. "Both are evergreen, but they require little water. In addition, both plants can be found on earth in a variety of forms covers all the way to the tree-like bushes of large size. Ceanothus offers a magnificent violet blue flowers in late spring or early summer to be enjoyed by bees and butterflies. Archtostaphylos is known for its twisted, smooth, orange-colored mahogany trunk and branches, a real admired CaliforniaClassic. "

Buchholz well, but I understand the beauty of Ceanothus Manzanita me to sleep. How you would like something with the color for us type A gardener, which bloom stalks our yards and plants as flamboyant rock star?

I heard that he looked up, but we are on the phone, so I can not say for sure. Some perennials, he suggests, are Erigeron Glaucus' Cape Sebastian, which is "a substitute for the ubiquitous native of Santa Barbara daisies, and many varieties of native or Sage SageSalvia as Cleveland, and 'Bee Bliss' Salvia. Other local color to consider water as Mimulus (Monkey Flower) variety, and Iris Fremontodendron douglasiana (Flannel Bush), which requires almost none, and has a nice shape, fig leaves and large yellow flowers. And to beat all year long blue-gray foliage color, sets plant Festuca idahoensis.

Replace your lawn with a low-growing ground cover that can cut less water and maintenance requirementsis the way of the future. If your lawn has walked, you can try this instead of ground cover: Prunella Incisa, chamomile, thyme, Lippia, Scotch moss and iris.

For more information, original layout with photos get a copy of the California Native Plants for the Garden of Cachuma Press published In the meantime, remember that the local staff kindergarten that "green is the new pink!" It's time to order a wide selection of native plants.

Griss has some recommendations forSaving water this summer:

This is to avoid going to faint when you see your summer water bill. . .

1.Reduce the terms of the irrigation system through a reduction in minutes per cycle. (Reduction adjusted execution time of 2 minutes to every 10 minutes.)

2 Replace grass with low water consumption was home, once established, can be adapted to grow in our climate without irrigation in summer.

3.Install drip irrigation with 1 / 2 liter and strong emittersMulch.

4.Irrigate between midnight and 6 am to reduce water loss through evaporation and wind.

Visit Annie dirtdiva.com and bring your friends!


Conserve water in your garden this summer

Chainsaw Comparisons Coupon !8!# New Double Oven Dual Fuel Range








Sponsor Links